Not getting the performance you want from your skateboard? There is probably something wrong with it. The good news is that in most cases, you don’t necessarily have to replace parts on your skateboard. Usually, a little cleaning, or a little wringing will do the trick, and your skateboard will feel like new again.
In this article, we will talk about troubleshooting common skateboard problems. Why do you want to do this? First, you’ll save a lot of money doing simple things yourself rather than having a professional repairman do it for you, or even replacing parts that still work just fine.
If you’re ready to solve common problems with your skateboard, read on.
1. The wheels of the skateboard do not rotate freely. This looks like a case of dirty skateboard bearings. As you can see, bearings help your wheels roll smoothly. However, dirt builds up in your bearings over time, making it difficult to ride.
Usually, all you have to do is clean the bearings. Simply pull them off your wheels, apply cleaner, and re-lube them. However, if the bearings are about one to two years old, the bearings are likely already worn out. In this case, no amount of cleaning will make them spin freely anymore. You will then have to purchase a new set of bearings.
2. Bite the wheel. Wheel bite occurs when your wheels snap against your deck, either from a hard landing or if you make a hard spin on your board. Wheel bites can be dangerous if you ride a lot. They can cause your wheels to suddenly stop spinning and throw you off your board.
To prevent wheel bite, you can either use smaller wheels or put risers on your trucks. Doing either of these options provides more clearance to move the wheels, thus preventing them from crushing against the board.
3. Something feels “loose” with your Skateboard wheels. If you feel like something is about to come loose from your skateboard, or if your board feels battered, something is probably already starting. Therefore, it is important that you check the bolts and nuts on your board before you ride it. If there are loose nuts and bolts, tighten them first. It can be very embarrassing—and downright dangerous—to ride a board that’s falling apart.
Learning how to troubleshoot common skateboard problems will help you save money by making easy fixes yourself. However, if you are not confident in your repair skills, it would be best to leave the matter in the hands of an expert skateboard repairman. They do cost money, but not as much as you’d spend on new parts if you broke them because of your failed attempt to fix your board.
Most importantly, check your forum regularly. Take a close look at every nook and cranny before you ride it. Doing so will ensure that your board is in good condition and will last longer. Some people call it preventative maintenance, and you will be doing yourself and your board a favor.
0 Comments